LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> MDX >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System >> Dust and Pollen Filter Replacement

Dust and Pollen Filter Replacement

  1. Open the glove box. Remove the glove box stop on right side, then let the glove box hang down (see GLOVE BOX REMOVAL/INSTALLATION ).
  2. Remove the dust and pollen filter assembly (A) from the blower unit.
    Fig 1: Identifying Dust And Pollen Filter Assembly
    G05487707Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the filter (A) from the housing (B), and replace the filter.
    Fig 2: Identifying Filter And Housing
    G05487708Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the filter in the reverse order of removal. Make sure that there is no air leaking out of the blower unit.
scientia non olet · About LEMON Manuals