Drive Belt Replacement

WARNING: This page is about a different car, the 2010 Acura TL and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

Belt tension release tool Snap-on YA9317 or equivalent

Remove the engine compartment covers (see ENGINE COMPARTMENT COVER REPLACEMENT )
Move the auto-tensioner (A) using the belt tension release tool in the direction shown to relieve tension from the drive belt, then remove the drive belt

Fig 1: Locating Auto-Tensioner
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the new bell in the reverse order of removal
NOTE: For belt routing, see COMPONENT LOCATION INDEX & DRIVE BELT ROUTING .