Outgoing Calls
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
If a client says that they cannot place a call using the HFL system, ask if the call was initiated through the HFL system or the cell phone itself If the call is placed by the HFL system
- Make sure the Bluetooth feature is turned on in the cell phone
- Make sure the cell phone is paired to the HFL system and linked
- Make sure the client is pressing the TALK button (A) or the HFL TALK button (B) before each command and going through the calling process correctly
- Make sure the client is pressing the PICK-UP button (C) or the HFL TALK button and not the HANG-UP button (D), the HFL BACK button (E), the TALK button, or the BACK button (F)
- Check if the cell phone has an Authorized Connections or Trusted option
- Do a soft reset to the cell phone
If the call is placed by the cell phone
The call will remain on the handset until you transfer it over to the HFL system To continue the call on the HFL system, you must use the Transfer command by pressing and releasing the TALK button or the HFL TALK button during an active call and saying "Transfer" The client can now continue the call using the HFL system