Shift Lock Solenoid Test
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the HDS to the DLC (A) located under the driver's side of the dashboard
- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode Make sure the HDS communicates with the PCM If it does not, go to the DLC circuit troubleshooting (see DLC CIRCUIT TROUBLESHOOTING )
- Select Shift Lock Solenoid Test in the Miscellaneous Test Menu, and check that the shift lock solenoid operates with the HDS
- Check that the shift lever can be moved out of P when the Shift Lock Solenoid is ON Move the shift lever back to P, and check that it locks with the Shift Lock Solenoid is OFF
- Check that the shift lock releases when the shift lock release is pushed, and check that it locks when the shift lock release is released
- If the shift lock solenoid does not work properly, go to the shift lock system troubleshooting (see SHIFT LOCK SYSTEM CIRCUIT TROUBLESHOOTING )