Receiver/Dryer Desiccant Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air

Remove the A/C condenser (see A/C Condenser Replacement )
Remove the cap (A) from the bottom of the A/C condenser Remove the O-ring (B) and the desiccant (C)

Fig 1: A/C Condenser O-Ring And Cap With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the receiver/dryer in the reverse order of removal, and note these items
- Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (DENSO ND-OIL 8) before installing them Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage
- Install the cap to the specified torque It is made of plastic and can be easily stripped