LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> Under-Dash Fuse/Relay Box >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Make sure you have the anti-theft code for the audio or the navigation system, then write down the audio presets.
  2. Make sure the ignition switch is OFF.
  3. Disconnect the negative battery cable, then disconnect the positive cable, and wait at least 3 minutes.
  4. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  5. Disconnect the connectors from the fuse side of the under-dash fuse/relay box (A).
    Fig 1: Identifying Under-Dash Fuse/Relay Box
    G06269240Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Remove the mounting bolt(s), and pull the fuse/ relay box away from the body.
  7. Disconnect the connectors from the back side of the under-dash fuse/relay box, then remove the under-dash fuse/relay box.
  8. Carefully remove the relays by prying under the base of the relay.
    NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.
scientia non olet · About LEMON Manuals