LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers/Washers >> Washer Fluid Level Switch Test

Washer Fluid Level Switch Test

  1. Remove the right inner fender (see FRONT SEAT ACTIVE HEAD RESTRAINT INSPECTION ).
  2. Disconnect the 2P connector (A) from the washer fluid level switch (B).
    Fig 1: Identifying Washer Fluid Level Switch 2P Connector
    G06268815Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the washer fluid level switch from the washer reservoir.
    NOTE: Fluid may flow out of the opening.
  4. Check for continuity between the No. 1 and No. 2 terminals in each float position.
    • There should be continuity when the float is down.
    • There should be no continuity when the float is up.
  5. If the continuity is not as specified, replace the switch.
scientia non olet · About LEMON Manuals