LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> CSX Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Automatic Transmission >> Output Shaft (Countershaft) Speed Sensor Replacement

Output Shaft (Countershaft) Speed Sensor Replacement

  1. Remove the air intake duct (see THROTTLE BODY REMOVAL/INSTALLATION ) and air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION ).
  2. Disconnect the output shaft (countershaft) speed sensor connector.
  3. Install the new O-ring (A) on the new output shaft (countershaft) speed sensor (B), then install the output shaft (countershaft) speed sensor in the transmission housing.
    Fig 1: Identifying O-Ring And Output Shaft (Countershaft) Speed Sensor
    G06265045Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Check the connector for rust, dirt, or oil, then connect the connector securely.
  5. Install the air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION ) and air intake duct (see THROTTLE BODY REMOVAL/INSTALLATION ).
scientia non olet · About LEMON Manuals