LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> CSX Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Navigation System) >> System Description >> Navigation Unit Inputs and Outputs for Connector D (5P)

Navigation Unit Inputs and Outputs for Connector D (5P)

WARNING: This page is about a different car, the 2008 Acura CSX, 2007 Acura CSX, and 2006 Acura CSX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Navigation Unit Inputs And Outputs For Connector D (5P) Terminal
G06268994Courtesy of AMERICAN HONDA MOTOR CO., INC.
CONNECTOR TERMINAL REFERENCE

Terminal Number Wire Color Terminal Name Description Voltage (about) Symptom
1 BRN MIC GND Ground for microphone signal 0 V If open: No microphone signal shown in diagnostics: "Navi System Link" and Functional Set up "Mic Level".
If short to around: No effect on voice recognition.
2 YEL MIC SIG Microphone output signal positive 4{5 V (with TALK button pressed) If open: No micrphone signal shown in diagnostic screens: "Navi System Link" and Functional Setup "Mic Level".
If short to ground: No microphone signal shown in diagnostic screens: "Navi System Link" and Functional Setup "Mic Level".
3 GRY MIC SHIELD Shield for terminal No. 1, 2, 5 0 V If open: No effect on voice recognition.
If short to ground: No effect on voice recognition.
4 GRN HFL NAVI GUIDE Steering wheel switch output 4 | 5 V (TALK button depressed)
2.5 | 3 V (BACK button depressed)
If open: Steering wheel "TALK", and "BACK" switch/buttons do not work.
If short to ground: Steering wheel "TALK", and "BACK" switch/buttons do not work.
5 ORN MIC ADPT Control signal for microphone 0 V If open: No effect on voice recognition.
If short to around: No effect on voice recognition.