LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> CSX Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Navigation System) >> System Description >> Navigation Unit Inputs and Outputs for Connector C (12P)

Navigation Unit Inputs and Outputs for Connector C (12P)

WARNING: This page is about a different car, the 2008 Acura CSX, 2007 Acura CSX, and 2006 Acura CSX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Navigation Unit Inputs And Outputs For Connector C (12P) Terminal
G06268993Courtesy of AMERICAN HONDA MOTOR CO., INC.
CONNECTOR TERMINAL REFERENCE

Terminal Number Wire Color Terminal Name Description Voltage (about) Symptom
1 WHT {B BACK UP Continuous power source Battery voltage If open: Display picture goes out (display back light still on).
NOTE: System will reboot to "enter code" screen.

If short to ground: Blows fuse No. 23 (10 A) in the under-dash fuse/relay box.
4 BLK GND Ground for navigation unit 0 V If open: No effect on system.
If short to ground: No effect on system.
7 BRN BACK LT | Reverse signal of select laver from "Multiplex integrated Control unit" (A/T) or backup light switch (M/T) In reverse, battery voltage:
Otherwise 0 V
If open: Navigation never sees the reverse signal and back-up camera does not come on when in reverse. Diagnostic screen "Car Status", "Back" = 0.
If short to ground: Blows fuse No. 10 (7.5 A) in the under-dash fuse/relay box.