Selector Control Shaft Bearing Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

Remover shaft 07936-GE0A000
Sliding hammer weight 07936-371020A
Driver handle, 15 x 135L 07749-0010000
Attachment, 22 x 24 mm 07746-001A800

Remove the control shaft bearing from the transmission housing using the remover head the remover shaft and the sliding hammer weight

Fig 1: Removing Control Shaft Bearing From Transmission Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install a new bearing in the transmission housing using the driver handle and the 22 x 24 mm attachment

Fig 2: Installing Bearing In Transmission Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.