Transfer Hypoid Drive Gear Bearing Replacement
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools Required
- Driver handle, 15 x 135L 07749-0010000
- Attachment, 42 x 47 mm 07746-0010300
- Attachment, 40 x 50 mm 07LAD-PW50601
- Remove the tapered roller bearing (A) from the transfer hypoid drive gear (B) using the driver handle, the 42 x 47 mm attachment, a bearing separator (C) and a press
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install a new bearing on the transfer hypoid drive gear using the driver handle, the 40 x 50 mm attachment, and a press
Courtesy of AMERICAN HONDA MOTOR CO., INC.