LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> CSX Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Automatic Transmission) >> General Troubleshooting Information >> Clear A/T DTCs Procedure

Clear A/T DTCs Procedure

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard
    Fig 1: Identifying Data Link Connector
    G05990587Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode
  3. Make sure the HDS communicates with the PCM If it does not, go to the DLC circuit troubleshooting (see DLC CIRCUIT TROUBLESHOOTING )
  4. Clear the DTC(s) on the HDS screen
scientia non olet · About LEMON Manuals