DTC U0164: Door Multiplex Control Unit Lost Communication with Climate Control Unit
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see
TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
)
- Clear the DTCs with the HDS
- Turn the ignition switch to LOCK (0) and then back to ON (II), or press the engine start/stop button to select the OFF mode and then the ON mode
- Wait for at least 6 seconds
- Check for DTCs with the HDS
Is DTC U0164 indicated?
YES -Go to the door multiplex control unit input test and check the power and ground If OK, replace the driver's power window master switch (see Power Window Master Switch Replacement )
NO -Intermittent failure, the system is OK at this time Check for loose or poor connections between the door multiplex control unit and climate control unit