Driver's MICU: Wiper
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
The driver's MICU control of the wiper is based on input signals from each switch
INPUT AND OUTPUT CHART
| Input | Output | |
|---|---|---|
| Driver's MICU | IG1 power supply Brake pedal position switch Transmission range switch P position (A/T) Wiper switch (INT & LO) Wiper switch (HI & LO) Wiper switch (MIST) Wiper switch (AS) Wiper switch intermittent dwell time controller |
Wiper intermittent relay Wiper motor high/low relay |
| B-CAN | Parking brake signal (A/T) IG1 meter signal (A/T) Washer signal Keyless access signal Vehicle speed pulse signal |
WIP SW messages |