DTC 1402: Audio Error 2
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This navigation DTC sets when the audio-navigation unit detects a mechanical malfunction in the CD/DVD player.
- Check the vehicle battery condition first (see BATTERY TEST )
- Before you troubleshoot, make sure to follow the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION )
- Check the most recent DTC (see HOW TO CHECK ERROR HISTORY )
- Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode
- Check the most recent DTC (see
HOW TO CHECK ERROR HISTORY )
Is DTC 1402 indicated?
YES -Check if the audio system functions are working properly. If any problems are found, go to affected troubleshooting in audio service information.
NO -Intermittent failure, the system is OK at this time