Fuel Pipe Protector Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands
Take care not to scratch the body
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

Remove the left rear wheel (see HUB BEARING UNIT REPLACEMENT )
Remove the clips, then remove the fuel pipe protector (A)

Fig 1: Identifying Fuel Pipe Protector With Clip
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the protector in the reverse order of removal, and note these items

If the clips are damaged or stress-whitened, replace them with new ones
Push the clips into place securely