Emblem/Sticker Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When removing the emblems/stickers, take care not to scratch the body

To remove the front "A" emblem, raise the vehicle on a lift From underneath the vehicle, remove the two screws, then remove the emblem
Clean the body surfaces where emblems/sticker are applied with a shop towel dampened in isopropyl alcohol After cleaning, keep oil, grease, and water from getting on the surface
Apply the emblems/sticker where shown When installing the ULEV sticker on the inside surface of the left rear door quarter glass, align the sticker with the edge of the glass mark and the edge of the black ceramic as shown, then press the sticker into place, and remove the application tape

Fig 1: Identifying Front "A" Emblem Location
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Identifying Emblem And Sticker Location
Courtesy of AMERICAN HONDA MOTOR CO., INC.