Air Cleaner Removal/Installation

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Do the battery removal procedure (see BATTERY REMOVAL AND INSTALLATION )
Disconnect the MAF sensor/IAT sensor 5P connector (A)

Fig 1: Identifying MAF Sensor/IAT Sensor 5P Connector, Harness Clamps, Bolt, Band And Air Cleaner Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the harness clamps (B) and the bolt (C)
Loosen the band (D), then remove the air cleaner housing (E)
Install the parts in the reverse order of removal
NOTE: When tightening the screw of the hose band (F), align the edge of the hose band (G) between the marks (H) (or within the mark (I)) painted on the hose band
Do the battery installation procedure (see BATTERY REMOVAL AND INSTALLATION )