Driver's door
- Remove the power window master switch and disconnect its connector (see
MASTER SWITCH TEST/REPLACEMENT
).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check for continuity between the power window master switch 22P connector terminals.
- There should be continuity between the No. 11 and No. 17 terminals when the door lock switch is in the LOCK position. (With security)
- There should be no continuity between the No. 11 and No. 17 terminals when the door lock switch is in the UNLOCK position. (With security)
- There should be continuity between the No. 11 and No. 19 terminals when the door lock switch is in the UNLOCK position.
- There should be no continuity between the No. 11 and No. 19 terminals when the door lock switch is in the LOCK position.
- If the continuity is not as specified, replace the power window master switch.