LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2009 >> CSX Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Entry Lights Control System >> Ignition Key Switch Test

Ignition Key Switch Test

  1. Remove the steering column upper and lower covers (see COLUMN COVER REMOVAL AND INSTALLATION ).
  2. Disconnect the 6P connector (A) from the ignition key switch.
    Fig 1: Identifying Ignition Key Switch 6P Connector
    G06268788Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the No. 1 and No. 2 terminals.
    • There should be continuity with the key in the ignition switch.
    • There should be no continuity with the key removed.
  4. If the continuity is not as specified, replace the steering lock assembly.
scientia non olet · About LEMON Manuals