Resetting the Display Panel
WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
The procedure should be done to reset the display panel control unit if the HDS is unable to clear DTCs.
- Press and hold the rear window defogger button, the recirculation button, and passenger's temperature control up (hot) buttons.
- Turn the ignition switch to ON (II) while continuing to hold the buttons.
- Hold the buttons for 6 seconds, then release.NOTE:
- With navigation: If the radio is on, the audio-HVAC subdisplay unit will flash as the display panel is being reset. The clock will reset to 1:00.
- Without navigation: If the radio is on, the display panel control unit screen will flash as the display panel is being reset.