Oil Filter Feed Pipe Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT )
Remove the oil filter feed pipe

Fig 1: Identifying Oil Filter Feed Pipe
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut

Fig 2: Identifying Oil Filter Feed Pipe
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Apply new engine oil to the oil filter feed pipe threads, then torque the oil 1 liter feed pipe to 35 Nm (3.6 kgf.m, 26 lbf.ft), then remove the nuts from the oil filter feed pipe
Install the oil filter (see ENGINE OIL FILTER REPLACEMENT )