LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> TSX Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering System >> Power Steering >> Power Assist Check

Power Assist Check

NOTE: This test should be done with original equipment wheels and tires at the correct tire pressure.
  1. Check the power steering fluid level (see FLUID REPLACEMENT  ).
  2. Start the engine, let it idle, and turn the steering wheel from lock-to-lock several times to warm up the fluid.
  3. Attach a commercially available spring scale to the steering wheel. With the engine idling and the vehicle on a clean, dry floor, pull the scale as shown and read it as soon as the tires begin to turn.
    • If the scale reads no more than the specification, the gearbox and pump are OK.
    • If the scale reads more than the specification, troubleshoot the steering system (see SYMPTOM TROUBLESHOOTING  ).

    Initial turning load: 29 N (3.0 kgf, 6.6 lbf) 

    Fig 1: Checking Steering Wheel With Spring Scale
    G05491785Courtesy of AMERICAN HONDA MOTOR CO., INC.