Fuel Tank Unit Removal and Installation: Removal

Relieve the fuel pressure (see FUEL PRESSURE RELIEVING ).
Remove the fuel fill cap.
Remove the trunk floor trim panel.
Remove the access panel (A) from the floor.

Fig 1: Identifying Access Panel, Fuel Tank Unit 5P Connector And Quick-Connect Fitting
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the fuel tank unit 5P connector (B).
Disconnect the quick-connect fitting (C) from the fuel tank unit.
Using the special tool, loosen the locknut (A).

Fig 2: Loosening Locknut Using Special Tool
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the locknut (A), and the fuel tank unit (B).

Fig 3: Identifying Locknut And Fuel Tank Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.