LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> TL Type S, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission >> Shift Lever Housing Replacement

Shift Lever Housing Replacement

  1. Remove the rear center console (see CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION ).
  2. Remove the center console panel (see CENTER CONSOLE PANEL REMOVAL/INSTALLATION ).
  3. Remove the shift lever bracket (A) and center console duct (B).
    Fig 1: Identifying Shift Lever Bracket And Center Console Duct
    G05458736Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the harness clips (A). D
    Fig 2: Identifying Harness Clips, Cotter Pin, Shift Cable Clip And Shift Cables
    G05458737Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the cotter pin (B), washer (C), and clamp (D).
  6. Remove the shift cable clip (E).
  7. Remove the select cable and shift cables (F) as shown.
  8. Remove the shift lever housing.
    Fig 3: Shift Lever Housing With Torque Specifications
    G05458738Courtesy of AMERICAN HONDA MOTOR CO., INC.
  9. Install the shift lever housing in the reverse order of removal.
  10. Install the center console panel (see CENTER CONSOLE PANEL REMOVAL/INSTALLATION ).
  11. Install the rear center console (see CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION ).
scientia non olet · About LEMON Manuals