Select Arm Clearance Inspection

Measure the clearance between the select arm (A) and interlock (B) with a feeler gauge (C). If the clearance is more than the service limit, go to step 2.
Standard: 0.05-0.25 mm (0.002-0.010 in.)

Service Limit: 0.5 mm (0.020 in.)

Fig 1: Measuring Clearance Between Select Arm And Interlock
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Measure the width of the select arm.
- If the width is not within the standard, replace the select arm.
- If the width is within the standard, replace the interlock.
  Standard: 12.9-13.0 mm (0.50-0.51 in.)
  
  Fig 2: Identifying Width Of Select Arm
  Courtesy of AMERICAN HONDA MOTOR CO., INC.