Countershaft Bearing Replacement

Special Tools Required 

• Adjustable bearing puller, 45-75 mm 07YAC-0010100
• Attachment, 72 x 75 mm 07746-0010600
• Driver 07749-0010000
• Slide hammer, 3/8"-16 UNF commercially available

1. Remove the bearing set plate (A) from the clutch housing (B).
   Fig 1: Identifying Bearing Set Plate And Clutch Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Remove the needle bearing (A) from the clutch housing (B) using the 45-75 mm adjustable bearing puller (C) and a commercially available 3/8"-16 UNF slide hammer (D).
   Fig 2: Removing Needle Bearing From Clutch Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install the new needle bearing (A) using the driver (B) and 72 x 75 mm attachment (C).
   Fig 3: Installing Needle Bearing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Install the bearing set plate (A) with bolts (B).
   Fig 4: Bearing Set Plate Bolts With Torque Specifications

   Courtesy of AMERICAN HONDA MOTOR CO., INC.