Mainshaft 4th Gear Replacement

Special Tools Required 

Driver, 40 mm I.D. 07746-0030100

1. Remove the mainshaft 4th gear (A) with a press. Place a shaft protector (B) between the press and the mainshaft (C) to prevent damaging the mainshaft.
   Fig 1: Identifying Mainshaft 4th Gear, Shaft Protector And Mainshaft

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Slide a new mainshaft 4th gear (A) over the mainshaft (B), then press it into place using the driver, 40 mm and a press.
   Fig 2: Identifying Mainshaft 4th Gear And Mainshaft

   Courtesy of AMERICAN HONDA MOTOR CO., INC.