ATF Cooler Hose Replacement

Slide the ATF cooler hoses over the ATF cooler lines until the hose ends contact the bulge on the ATF cooler lines.
J35A8 engine: Align the marks (A) on the ATF cooler hoses of the air cooled ATF cooler as shown.

Fig 1: Identifying Marks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
At the joints (A) under the radiator, secure the hoses with the clips (B) at 2-4 mm (0.08-0.16 in.) (C) from the hose ends.
J32A3 engine

Fig 2: Identifying Joints And Clips - J32A3 Engine
Courtesy of AMERICAN HONDA MOTOR CO., INC.

J35A8 engine

Fig 3: Identifying Joints And Clips - J35A8 Engine
Courtesy of AMERICAN HONDA MOTOR CO., INC.
At the joints (D) except under the radiator, secure the hoses with the clips (E) at 6-8 mm (0.08-0.16 in.) (F) from the hose ends.