1st Clutch Hub Replacement

Special Tools Required 

• Driver 07749-0010000
• Driver attachment 07947-6340500
• Attachment, 78 x 90 mm 07GAD-SD40101

1. Remove the 1st-hold clutch hub (A) from 1st gear (B) using the driver and the driver attachment and a press.
   Fig 1: Removing 1st-Hold Clutch Hub From 1st Gear

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Remove the 1st clutch hub (C) from 1st gear.
3. Install a new 1st clutch hub (A) over 1st gear (B), and install the 1st-hold clutch hub (C) in 1st gear.
   NOTE: If 1st gear and the 1st-hold clutch hub are replaced, use 1st gear and the 1st-hold clutch hub with the same identifying letters (A or B).
   Fig 2: Identifying 1st Clutch Hub, 1st Gear And 1st-Hold Clutch Hub

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Install the 1st-hold clutch hub (A) in 1st gear (B) using the driver and the attachment, 78 x 90 mm, and a press.
   Fig 3: Installing 1st-Hold Clutch Hub In 1st Gear

   Courtesy of AMERICAN HONDA MOTOR CO., INC.