DTC B1145: Front Passenger's Power Window Position Detect Circuit Error
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see
TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Clear the DTC with the HDS.
- Turn the ignition switch OFF, and then back ON (II).
- Open and close the front passenger's power window by using the front passenger's switch manually.
- Check for DTCs with the HDS.
Are DTCs B1130 or B1131 indicated?
YES -Troubleshoot the DTC B1130 (see DTC B1130: FRONT PASSENGER'S POWER WINDOW MOTOR A PULSE MALFUNCTION; DTC B1131: FRONT PASSENGER'S POWER WINDOW MOTOR B PULSE MALFUNCTION ) or B1131 (see DTC B1130: FRONT PASSENGER'S POWER WINDOW MOTOR A PULSE MALFUNCTION; DTC B1131: FRONT PASSENGER'S POWER WINDOW MOTOR B PULSE MALFUNCTION ).
NO -Go to step 5.
- Reset the power window control unit and the front passenger's power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).
- Check for DTCs again with the HDS.
Is DTC B1145 indicated?
YES -Go to step 7.
NO -The system is recovered at this time.
- Substitute a known-good passenger's power window switch.
- Open and close the front passenger's power window by using the front passenger's switch manually.
- Check for DTCs with the HDS.
Is DTC B1145 indicated?
YES -Faulty front passenger's window motor; replace it.
NO -Faulty front passenger's power window switch; replace the front passenger's power window switch.