Transfer Cover Oil Seal Replacement

Special Tools Required 

• Driver 07749-0010000
• Attachment, 65 mm 07JAD-SH30100

1. Remove the oil seal from the transfer cover.
   Fig 1: Removing Oil Seal From Transfer Cover

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install the new oil seal (A) in the transfer cover (B) to a height (C) of 0-1 mm (0-0.04 in.) above the cover surface using the driver and the attachment (65 mm).
   Fig 2: Tapping Oil Seal Into Transfer Cover

   Courtesy of AMERICAN HONDA MOTOR CO., INC.