LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Drive Plate Removal and Installation

Drive Plate Removal and Installation

  1. Remove the transmission assembly (see TRANSMISSION REMOVAL  ).
  2. Remove the drive plate (A) and washer (B) from the engine crankshaft.
    Fig 1: Drive Plate And Washer With Torque Specifications
    G05495717Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the drive plate and washer on the engine crankshaft, and tighten the eight bolts in a crisscross pattern in at least two steps.
  4. Install the transmission assembly (see TRANSMISSION INSTALLATION  ).
scientia non olet · About LEMON Manuals