LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> ATF Cooler Hose Replacement

ATF Cooler Hose Replacement

  1. Slide the ATF cooler hoses over the ATF cooler lines until the hose ends contact the bulge (A) on the ATF cooler lines.
    Fig 1: Identifying Gap Between Hose Clip And Hose End
    G05495723Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Secure the hoses with the clips (B) at 6-8 mm (0.2-0.3 in.) (C) from the hose ends.
  3. Secure the hoses at the ATF cooler with the clips (D) at 2-4 mm (0.1-0.2 in.) (E) from the hose ends.
  4. Install the ATF cooler hose (F) on the clamp (G) at the mark (H).
scientia non olet · About LEMON Manuals