LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> 3rd Clutch Transmission Fluid Pressure Switch Replacement

3rd Clutch Transmission Fluid Pressure Switch Replacement

  1. Remove the splash shield.
  2. Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A).
    Fig 1: 3rd Clutch Transmission Fluid Pressure Switch And Sealing Washer With Torque Specifications
    G05495612Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Make sure there is no water, oil, dust, or foreign particles inside the connector.
  4. Install the new 3rd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch.
  5. Connect the connector securely.
  6. Install the splash shield.
scientia non olet · About LEMON Manuals