Water Pump Inspection
WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the timing belt (see TIMING BELT REMOVAL ).
- Turn the water pump pulley counterclockwise.
Check that it turns freely. If it doesn't turn freely, replace the water pump (see WATER PUMP REPLACEMENT ).
NOTE: When you check the water pump pulley, you may see a small amount of "weeping" from the bleed holes (A). This is normal. - Install the timing belt (see TIMING BELT INSTALLATION ).