Power Mirror Replacement
WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the door glass fully.
- Remove the front door sash inner trim (see FRONT DOOR SASH INNER TRIM REPLACEMENT ).
- Disconnect the connector (A). While holding the mirror (B), remove the nuts.
- Remove the mirror (A). Take care not to scratch the door.
- Install the mirror in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly.
- When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.