Speaker Test/Replacement: Subwoofer
WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear shelf (see TRIM REMOVAL/INSTALLATION - REAR SHELF AREA ).
- Remove the four mounting bolts from the subwoofer (A).
- Disconnect the 2P connector (B), and remove the subwoofer.
- Measure the resistance between the No. 1 and No. 2 terminals. There should be about 2 Ω.
- If the resistance is not as specified, replace the subwoofer.