LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Navigation System) >> Rearview Camera Removal/Installation

Rearview Camera Removal/Installation

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear license trim (see REAR LICENSE TRIM REPLACEMENT ).
  2. Inside the trunk lid, disconnect the connector (A), then remove the grommet (B) from the trunk lid and push the connector through the hole in the trunk lid.
    Fig 1: Identifying Trunk Lid Connector And Grommet
    G05463245Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screws and rearview camera (C).
  4. Install the camera in the reverse order of removal.