Trunk Lid Spoiler Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the trunk lid.

Open the trunk lid, and remove the nuts from inside the trunk lid.

Fig 1: Trunk Lid Spoiler Fastener Locations With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Close the trunk lid. Pull the trunk lid spoiler (A) up to release the clips (B, C, D) from the trunk lid, then remove the spoiler.

Fig 2: Identifying Trunk Lid Spoiler Fastener Locations
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the spoiler in the reverse order of removal and check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.