LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (SRS (Supplemental Restraint System)) >> SRS Unit Replacement >> Removal

SRS Unit Replacement: Removal

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If you are only disconnecting SRS unit connector A, skip step 2.
  1. Disconnect the negative cable from the battery, then wait for 3 minutes before starting work.
  2. Disconnect both seat belt tensioner connectors (see step 6 on DISCONNECTING SYSTEM CONNECTORS  ).
  3. Remove the center console rear section (see CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION ).
  4. Remove the center console panel (see CENTER CONSOLE PANEL REMOVAL/INSTALLATION ).
  5. Remove the heater ducts.
  6. Disconnect SRS unit connector A (28P), SRS unit connector B (28P), SRS unit connector C (16P), and remove the TORX bolts (D), then pull out the SRS unit.
    Fig 1: Identifying SRS Unit
    G05463569Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals