LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (SRS (Supplemental Restraint System)) >> ODS Unit Replacement >> Removal

ODS Unit Replacement: Removal

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative cable from the battery, then wait for 3 minutes before starting work.
  2. Disconnect the front passenger's side airbag 2P connector (see step 4 on DISCONNECTING SYSTEM CONNECTORS  ).
  3. Remove the passenger's seat assembly (see FRONT SEAT REMOVAL/INSTALLATION ) and seat-back cover (see FRONT SEAT-BACK COVER REPLACEMENT ).
  4. Remove the cover (A), disconnect the ODS unit 18P connector (B) and sensor connectors (C) from the ODS unit (D).
    Fig 1: Identifying Cover, ODS Unit 18P Connector And Sensor Connectors
    G05463577Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the two screws (E) and the ODS unit.
scientia non olet · About LEMON Manuals