LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (PGM-FI System) >> Knock Sensor Replacement

Knock Sensor Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover (see step 1 on REMOVAL ).
  2. Remove the fuel rails and the injector base (see INJECTOR BASE REMOVAL AND INSTALLATION ).
  3. Disconnect the knock sensor IP connector (A), then remove the knock sensor (B).
    Fig 1: Knock Sensor With Torque Specifications
    G05458143Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals