LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Fuel And Emissions Systems) >> General Troubleshooting Information >> ECM/PCM Reset

ECM/PCM Reset

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reset the ECM/PCM with the HDS while the engine is stopped.
  2. Turn the ignition switch OFF.
  3. Turn the ignition switch ON (II), and wait 30 seconds.
  4. Turn the ignition switch OFF, and disconnect the HDS from the DLC.
  5. Do the ECM/PCM idle learn procedure (see ECM/PCM IDLE LEARN PROCEDURE ).
scientia non olet · About LEMON Manuals