LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Automatic Transmission) >> Output Shaft (Countershaft) Speed Sensor Replacement

Output Shaft (Countershaft) Speed Sensor Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor (A).
    Fig 1: Locating Output Shaft (Countershaft) Speed Sensor With Torque Specifications
    G05458990Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install a new O-ring (B) on a new output shaft (countershaft) speed sensor, then install the output shaft (countershaft) speed sensor in the transmission housing.
  3. Check the connector for rust, dirt, or oil, then connect the connector securely.
scientia non olet · About LEMON Manuals