LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Automatic Transmission) >> 3rd Clutch Transmission Fluid Pressure Switch Replacement

3rd Clutch Transmission Fluid Pressure Switch Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the splash shield.
  2. Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A) and the sealing washer (B).
    Fig 1: Locating 3rd Clutch Transmission Fluid Pressure Switch And Sealing Washer With Torque Specifications
    G05458992Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install a new 3rd clutch transmission fluid pressure switch and a new sealing washer, and tighten the switch.
  4. Make sure there is no water, oil, dust, or foreign particles inside the connector.
  5. Connect the connector securely.
  6. Install the splash shield.
scientia non olet · About LEMON Manuals