Ignition Coil Removal/Installation

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the right side engine compartment cover (A), then remove the left rear engine compartment cover (B) and right rear engine compartment cover (C).

Fig 1: Identifying Right Side Engine Compartment Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the engine cover.

Fig 2: Identifying Engine Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the ignition coil connectors (A), then remove the ignition coils (B).

Fig 3: Ignition Coil Connectors With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the ignition coils in the reverse order of removal.