LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Wiper System & Washer System) >> Wiper Blade Replacement

Wiper Blade Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the windshield wiper arm off the windshield, rising the driver's side first, then the passenger's side.
  2. Press and hold the tab (A) and slide the wiper blade (B) toward the tab until it releases from the wiper arm (C).
    Fig 1: Identifying Wiper Blade And Wiper Arm
    G05462783Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Slide out the old rubber (A).
    Fig 2: Sliding Out Rubber
    G05462784Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install a new rubber in the reverse order of removal.
  5. Install the wiper blades onto the windshield wiper arms in the reverse order of removal.
  6. Test by turning on the wipers. If the blades slip, turn off the wipers and seat the attachments more firmly.
scientia non olet · About LEMON Manuals