Select Arm Clearance Inspection

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Measure the clearance between the select arm (A) and interlock (B) with a feeler gauge (C). If the clearance is more than the service limit, go to step 2.
Standard: 0.05-0.25 mm (0.002-0.010 in.)

Service Limit: 0.5 mm (0.020 in.)

Fig 1: Measuring Clearance Between Select Arm And Interlock
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Measure the width of the select arm.
- If the width is not within the standard, replace the select arm.
- If the width is within the standard, replace the interlock.
  Standard: 12.9-13.0 mm (0.50-0.51 in.)
  
  Fig 2: Identifying Width Of Select Arm
  Courtesy of AMERICAN HONDA MOTOR CO., INC.